November 21 - MotorTest

On to the next step. We test the RC's mother board front motor. Under the Arduino program library "Simple - Blink" example. We test the delay of the motor. Here's a rough sketch of the code we use to test the delay:

	/*
	Blink
	Turns on an Motor on for one second, then off for one second, repeatedly.
	This example code is in the public domain.
	*/
	// Pin 13 has an cable connected to turn motor on RC car
	// give it a name:
	int led = 13;
	// the setup routine runs once when you press reset:
	void setup() {
	// initialize the digital pin as an output.
	pinMode(Motor, OUTPUT);
	}
	// the loop routine runs over and over again forever:
	void loop() {
	digitalWrite(led, HIGH); // turn the Motor on (HIGH is the voltage level)
	delay(1000); // wait for a second
	digitalWrite(led, LOW); // turn the Motor off by making the voltage LOW
	delay(1000); // wait for a second
	}

view raw MotorTest hosted with ❤ by GitHub